|
Power supplies have often in the past, and still today,
been one of the most overlooked components in your computer. While
usually the first component to fail in a computer, it can also be the
first thing to check for when having system stability issues. With that
in mind, it is important that a quality PSU be purchased with tight
regulation, strong rails, low ripple (which I will explain further down
in the review), and high-grade production materials. Today we will be
looking at CoolMax’s Silent 450watt PSU provided by the great folks over
at CrazyPC!
Upon receiving the package from USPS, I was surprised at the weight of
the box. I thought for sure I had received someone else’s order instead
of the review item. I opened the box, and lo and behold, the CoolMAX
PSU, and weighing in at just under four pounds!

The
power supply, as you can clearly see, is painted with high-gloss black
paint similar to that of the PC Power & Cooling Deluxe series. There are
1 SATA connector, 1 P14 connector, 1 12V motherboard connector, 1 ATX
20pin to 24pin adapter, 1 Square 4pin 12V to 6pin 12V adapter, 6
standard Molex connectors, and 2 floppy connectors. The main ATX power
cable is sleeved. This is a common feature of just about any PSU, and
still a well welcomed one at that. Before going any further, I would
like to list and discuss the features as claimed by Coolmax.
Features:
-
Serial ATA Ready
-
3 Speed Fan Control Switch
-
120mm ball bearing fan design, long life,
noiseless and fastest cooling time.
-
Universal Connector Fits Most of Branded
Motherboards
-
Fully supports all Intel and AMD series
demand.
-
High quality gold-coated fan guard &
connectors are good for conduction.
-
Tube-tide design to tidy the wires.
-
Over voltage protection, short circuit
protection on all output levels
-
All DC output wires have 450mm length
I have a few
notes on the features, and though slightly deceptive, more or less
represent the true features. For starters, the mention of SATA ready,
would make you think 2 or more connectors, or so I was inclined to
believe.
I hope that I
wasn’t the only one to notice gold-coated fan guard is good for
conduction- I didn’t realize that the fan guard transferred heat or
power, but I’m picky. The gold-coating itself on the connectors doesn’t
actually help conduction, but it does help prevent corrosion which in
the future could lead to decreased electrical transfer. Why gold? Gold
doesn’t corrode (oxidize) under any circumstances except when mixed with
a concentrated solution of hydrochloric acid and nitric acid (little
chemistry lesson for you guys and gals).
My last nitpick
was with calling the cables, “tube-tide design.” Again, I was led to
believe different from actual results. Only one connector is wrapped up,
and that is the main ATX motherboard connector.
The PSU
features a 3 stage adjustable switch to control fan speed. Under all 3
different settings, the PSU was virtually silent. The max setting was
moving a good deal of air. I was unable to find the CFM rating, but if I
had to guess, 20-30cfm at the max setting judging from feel.

A quick shot of
the ratings on the PSU sticker, and I’ll move along to the numbers you
guys actually care about.

Test System
-
AMD Athlon 64 3200+ CG Clawhammer @ 2.0GHz
-
Gigabyte K8NNXP Motherboard
-
BFG 6800 OC @ 400MHz/800MHz NV5 Cooler
16pipes/6vs
-
512MB Micron PC3200 3-3-3-8 @ 3-2-2-8
2.85V
-
Western Digital 80GB 8MB PATA
-
Western Digital 80GB 8MB SATA
-
Maxtor 80GB 8MB PATA
-
Lite-On 8x DVD-+R/-+RW CD-R/CD-RW
-
Linksys 802.11b Wireless PCI Card
-
ATi TV Wonder Pro 2nd Gen.
-
2x Vantec 80mm Tornado’s
-
1x 80mm standard quad LED fan
-
2x UV cold cathodes
Reason for
listing EVERYTHING in my system was to give an idea of what kind of load
that was put on the PSU. I used Futuremark's 3DMark05 for load testing,
utilizing the demo. I chose 3dmark05 due to it being one of the most
taxing system-wide utilities currently available (even though scoring
doesn’t depict so). The demo was chosen instead of the actual benchmark
itself due to it using all of the resources that the system has to
offer- making good use of sound, video, and the rest of the system as
far as the demo goes. Obviously, the hard drives aren’t doing anything
except for the main boot drive, but nevertheless, the power draw is
there.
I measure
voltage and ripple under load and at idle for the 3.3V, +5V, -5V, +12V,
and -12V. Ripple, I'm sure, you haven’t seen in a PSU review before. For
this reason, my guess is that many people do not have the funds for a
nice Fluke O-scope or multi-meter. Today, I will be using a Fluke 87
Series True RMS multi-meter for testing. All voltages where measured
from the motherboard ATX connector at idle and at load.
Before I begin,
I would like to take the time to explain ripple and why it is important.
As a general statement, ripple is AC voltage that has been carried on
the DC line after the AC to DC transformation process. The closer the
ripple number is to 0, the cleaner the line is. This is also a good way
to tell the quality of the components within the PSU. There is a
certain amount of acceptable ripple to be left in DC voltages after
going through a transformer. The acceptable amount- I am unable to find.
I am currently in contact with PC Power and Cooling to learn about these
limits.
Just for some
sort of reference, I compared the CoolMAX against my current Demon 580w.
Now, on with the numbers!
|
|
|
DEMON 580 |
|
|
|
RAIL |
Voltage Idle |
Voltage Load |
Ripple Idle |
Ripple Load |
|
3.3V |
3.388V |
3.389V |
2.2mV |
2.2mV |
|
5V + |
5.24V |
5.2V |
8.0mV |
16mV |
|
5V - |
5.02V |
5.08V |
4.0mV |
17mV |
|
12V + |
12.06V |
11.95V |
35mV |
45mV |
|
12V - |
12.30V |
12.43V |
10.50mV |
25mV |
|
|
|
|
|
|
|
|
|
CoolMAX 450 |
|
|
|
RAIL |
Voltage Idle |
Voltage Load |
Ripple Idle |
Ripple Load |
|
3.3V |
3.361V |
3.352V |
9.0mV |
25mV |
|
5V + |
5.09V |
5.10V |
6.0mV |
8.50mV |
|
5V - |
4.95V |
5.01V |
4.5mV |
12mV |
|
12V + |
11.93V |
11.80V |
35mV |
40mV |
|
12V - |
11.58V |
11.67V |
3.3mV |
24mV |
Conclusion
The PSU, as you
can clearly see, performed well in all tests. The rails never fell out
of tolerable limits during benchmarking.
While this may
not be the PSU for super enthusiasts, as the 12v rail is lacking a
little on amperage, overall, the PSU is of high quality and performance.
No LED’s or adjustable pots on this PSU, but the name of the game is
silence. Overclocking video yielded higher results on this PSU than the
demon, by 12MHz core and 56MHz ram. I would like to thank CrazyPC for
sending over the CoolMAX, and I look forward to reviewing more quality
products available from the guys over at
CrazyPC. ClubOC
Recommended!
Available at CrazyPC!
|
Club
Overclocker Rating |
|
Innovation: |
8.5
out of 10 |
|
Performance: |
9.0 out of 10 |
|
Quality: |
9.5 out of 10 |
|
Stability: |
8.5 out of 10 |
|
Overclocking: |
N/A |
|
Software Pack: |
N/A |
|
Value: |
9.0 out of 10 |
|
Overall Rating 9.0 |
|
|
|
|
Skill Level |
|
Project Skill Level
(10 being hardest) |
3
out of 10 |

|